O indicates that the authentication mode is supported by the RTSP player.
X indicates that the authentication mode is NOT supported by the RTSP player.
Access name for stream 1 / Access name for stream 2: The access name is used to
differentiate the streaming source
.
When using a RTSP player to access the Network Camera,
and the video mode is set to MPEG-4, use the following RTSP URL command to request a
transmission of streaming data.
rtsp://<ip address>:<rtsp port>/<access name for stream1 or stream2>
For example, when the access name for stream 1 is set to live.sdp:
1. Launch a RTSP player.
2. Choose File > Open URL. An URL dialog box will pop up.
3. Type the URL command in the text box. For example:
4. The live video will be displayed in your player.
RTSP port /RTP port for video, audio/ RTCP port for video, audio
The RTSP (Real-Time Streaming Protocol) controls the delivery of streaming media. By default,
the port number is set to 554.
The RTP (Real-time Transport Protocol) is used to deliver video and audio data to the clients.
By default, the RTP port for video is set to 5556 and the RTP port for audio is set to 5558.
The RTCP (Real-time Transport Control Protocol) allows the Network Camera to transmit the
data by monitoring Internet traffic volume. By default, the RTCP port for video is set to 5557
and the RTCP port for audio is set to 5559.
The five ports can be changed between 1025 and 65535. The RTP port must be an even
number and
the RTCP port is RTP port number plus one, and thus always be odd
.
When the
RTP port changes, the RTCP port will change accordingly.
Quick Time player Real Player
Disable O
O
Basic O
O
Digest O
X
