LevelOne FCS-4010 User Manual Download Page 28

Page: 28 / 115

Device information

Multiple devices information

Firmware Information

The selected firmware information will show the information about the file that you selected.

Firmware version:

The version number of the selected firmware.

Select Firmware

You can use the

“Select firmware”

button to browse the file that you want upgrade onto the

selected device(s). After selected the file, Installation Wizard will check whether the file you
selected is correct. If it’s the correct version, then the package information will display the
information about the file and enable the

“Start Upgrade”

button. Therefore you can click on

the button to upgrade the firmware. If not, then it will be a pop-up warning message.

Summary of Contents for FCS-4010




















































































































Search results

Summary of Contents for FCS-4010

Reviews:

Related manuals for FCS-4010

Brands by name

Popular brands

LevelOne FCS-4010, User Manual

Search results

Summary of Contents for FCS-4010

Reviews:

Related manuals for FCS-4010

Brands by name

Popular brands