User’s Manual
AMG-2100
Gigabit Access and AP Management Gateway/
AMG-2101
Gigabit Access and AP Management Gateway Plus
210
If the amount of traffic is larger than 4 GB, then the attribute of “XXXX-4GB” is for the carry. For
example, if the amount is 5 GB, you must set “None-Byte-Amount = 1048576” and
“None-Byte-Amount-4GB = 1”.
On the other hand, if administrator fills in all attributes, it means that if any condition is reached,
the user will be kicked out from system. For example, if administrator set “None-Byte-Amount =
1048576”; “None- MaxByteIn = 1048576” and “None- MaxByteOut = 1048576”. It means that
whatever the downlink or uplink or total traffic exceeded the limit, the user will be kicked out from
system.
2.
VSA configuration in RADIUS server (IAS Server)
This section will guide you through a VSA configuration in your external RADIUS server. Before
getting start, please access your external RADIUS server’s desktop directly or remotely from
other PC.
2.1.
Step 1
Assume there are already have
users
in RADIUS Server
Assume there are already have
Groups
and assigned
users
to belong these
Groups
in
RADIUS Server
Assume there are already have
Policies
and assigned
Groups
to belong these
Policies
in
RADIUS Server
2.2.
Step 2
Run “Internet Authentication Server”
Open “Remote Access Policies”
Select a
Policy
Right click and scroll down to its properties page