User’s Manual
AMG-2100
Gigabit Access and AP Management Gateway/
AMG-2101
Gigabit Access and AP Management Gateway Plus
94
Selecting the Filter Rule Number 1 as an example:
o
Rule Number:
This is the
rule selected “1”. Rule No. 1 has the highest priority; rule No.
2 has the second priority, and so on.
o
Rule Name:
The rule name can be changed here.
o
Source/Destination – Interface/Zone:
There are choices of
ALL, WAN1
,
WAN2
,
Default
, and the named
Service Zones
to be applied for the traffic interface.
o
Source/Destination – IP Address/Domain Name:
Enter the source and
destination IP addresses. Domain Host filtering is supported but Domain name filtering
is not.
o
Source/Destination – Subnet Mask:
Select the source and destination subnet
masks.
o
Source- MAC Address:
The MAC Address of the source IP address. This is for specific
MAC address filter.
o
Service Protocol:
There are defined protocols in the
service protocols list
to be
selected.
o
Schedule:
When schedule is selected, clients assigned with this policy are applied the
firewall rule only within the time checked. There are three options,
Always
,
Recurring
and
One Time. Recurring
is set with the hours within a week.
o
Action for Matched Packets:
There are two options,
Block
and
Pass
.
Block
is to
prevent packets from passing and
Pass
is to permit packets passing.