User’s Manual
AMG-2100
Gigabit Access and AP Management Gateway/
AMG-2101
Gigabit Access and AP Management Gateway Plus
93
If the
Protocol Type
is
ICMP
, it will need to define
Type
and
Code
.
If the
Protocol Type
is
IP
, it will need to define
Protocol Number
.
2.
Rules
After the custom protocol is defined or just use the
Predefined Service Protocols
, you will need to
enable the
Firewall Rule
to apply these protocols.
o
Firewall Rules:
Click the number of
Filter Rule No.
to edit individual rules and click
Apply
to save the settings. The rule status will show on the list. Check
“Active”
checkbox and click
Apply
to enable that rule.
This link leads to the Firewall Rules page. Rule No.1 has the highest priority; Rule No.2 has
the second priority and so on. Each firewall rule is defined by Source, Destination and
Pass/Block action. Optionally, a Firewall Rule Schedule can be set to specify when the firewall
rule is enforced. It can be set to
Always
,
Recurring
or
One Time
.
