User’s Manual
AMG-2100
Gigabit Access and AP Management Gateway/
AMG-2101
Gigabit Access and AP Management Gateway Plus
85
5.7.5
Manually add AP
Configure AP adding by Manually, go to:
Access Points >> Adding
.
The AP also can be added manually even though when it is offline. Input the related data of the AP and
select a Template. After clicking
Add
, the AP will be added to the managed list.
AP Type
: This is the supported type of APs for centralized management.
AP Name:
Mnemonic name of the specific AP.
Admin Password:
Password required for this AP.
IP Address:
IP address of the specified AP.
MAC Address:
MAC address of the specific AP.
Remark:
Some extra information to be filled in for this AP if desired.
Service Zone (Tag-Based
only
):
This item is only shown when Tag-Based mode is selected
in
System Configuration
>>
LAN Port Mapping
. Select the name of Service Zone such as
Service Zone 1, Guest or Employee. And it is only for Multi-VAP AP only.
Template Applied:
The template which will be applied to the added AP.
Channel:
The selected channel will be applied to the added AP.
