User’s Manual
AMG-2100
Gigabit Access and AP Management Gateway/
AMG-2101
Gigabit Access and AP Management Gateway Plus
205
3)
Click on the
General
tab and choose
“Internet Protocol (TCP/IP)”
, and then
click
Properties
. Now, you can choose to
use DHCP or a specific IP address.
4)
Using DHCP:
If you want to use DHCP,
choose
“Obtain
an
IP
address
automatically”
and click
OK
. This is also
the default setting of Windows. Then,
reboot the PC to make sure an IP address is
obtained from AMG-2100/AMG-2101.
5)
Using Specific IP Address:
If you want to
use a specific IP address, acquire the
following information from the network
administrator: the
IP Address
,
Subnet Mask
and
DNS Server address
provided by your
ISP and the
Gateway
address
of AMG-2100/AMG-2101.
Caution:
If your PC has been set up completely, please inform the network administrator before proceeding to
the following steps.
