General Information
1
S023074
PA1
2020-05-12
7
– Modifications to the restraints system are not allowed. Do not make changes to, or relocate
the Supplementary Restraint System (SRS) components or wiring.
– Attachments or modifications to the driver's cabin area of the vehicle may affect the airbag
deployment timing and result in uncontrolled deployment.
– Drilling the frame and body structure must be conducted following the guidelines in Body,
and Frame and Body Mounting,
– Make sure that reinforcements are installed to maintain the integrity of the original body
structure when adding steps, grab handles or similar modifications.
– The vehicle must not be used for the purposes of towing, it must not be fitted with a tow bar
or any towing equipment.
Product Liability
The Converter shall be liable for any product liability (whether for death, personal injury, or
property damage) arising from any alteration to a LEVC vehicle or component made by the
Converter or any of its agents. LEVC shall not be liable for any such liability (except as provided
by law).
The Converter or equipment manufacturer is liable for the:
– Operational reliability and road-worthiness of the vehicle to its original intent
– Operational reliability and road-worthiness of any component or conversion, not listed in
original LEVC documentation
– Operational reliability and road-worthiness of the vehicle as a whole (for example the body
changes and/or additional equipment must not have a negative effect on the driving, braking
or steering characteristics of the vehicle)
– Subsequent damage resulting from the conversion or attachment and installation of unique
components, including unique electrical or electronic systems
– Functional safety and freedom of movement of all moving parts (for example axles, springs,
shafts, steering mechanisms and brakes)
– Functional safety and freedom of the tested and approved flexibility of the body and integral
chassis structure
Contact Information
NOTE
For additional information or technical support contact [email protected].
Conversion Homologation
The Vehicle Converter must observe any statutory rules and regulations and is responsible for
obtaining any homologation certification required.
NOTE
For additional information or technical support contact [email protected].
