Leuze DCR 50, Operating Instructions Manual

Page: 53 / 92

Configuration control
Leuze electronic DCR 50 53
Code Description Command Format Op-
tions De-
fault Notes/Examples
Echo option FW CM S/P/R/
G OE 0 0 Disable Raw Command Echoing
Example : FWCMSOE0
1 Enable Raw Command Echoing
Example : FWCMSOE1
Raw Command Enable FW CM S/P/R/
G OR 0 0 Disable Raw Commands
Example : FWCMSOR0
1 Enable Raw commands
Example : FWCMSOR1
8.2.10 General reader feedback parameters
Code Description Command Format Op-
tions Default Notes/Examples
Get All Reader Feedback
Parameters FB FB G Returns all Reader Feedback parameter
values in an XML element.
Example : FBFBG
Good Read Indication – Fre-
quency (Hz) FB GR S/P/R/
G FQ 2400 Good read beep output frequency.
Valid Range:
Example : FBGRSFQ2400
Good Read Indication –
Beep Volume (percent) FB GR S/P/R/
G VO 100 Valid Range: 0 to 100 percent
Example : FBGRSVO100
Good Read Indication –
Beep As IO FB GR S/P/R/
G BI 0 0 Good Read Indication is a fre-
quency output as defined by FB-
GRGFQ
Example : FBGRSBI0
1 Good Read Indication is an IO
signal
Example : FBGRSBI1
8.2.11 Setup default AGC mode
Code Description Command Format Op-
tions Default Notes/Examples
Get All Scene Manager Pa-
rameters SC SC G Returns all Scene Manager parameter
values in an XML element.
Example : SCSCG
Scene Manager Mode SC SP S/P/R/
G MO NO NO Normal AGC Mode
Example : SCSPSMONO
BY Bypass AGC Mode
Example : SCSPSMOBY
FX Fixed AGC Mode
Example : SCSPSMOFX