Leuze DCR 50, Operating Instructions Manual

Page: 45 / 92

Configuration control
Leuze electronic DCR 50 45
8.2.5 Decoder and general decoding parameters
Code Description Command Format Op-
tions De-
fault Notes/Examples
Get All Decoder Parameters CD CD G Returns all decoder parameter values in
an XML element.
Example : CDCDG
CD DP DPM parameters (Not supported)
Decoder Timing – Get All
Parameters CD DT G Returns all decoder timing parameter
values in an XML element.
Example : CDDTG
Decode Time Limit (ms) CD DT S/P/R/
G TL 150/32
0 Time limit (decoder)
Example : CDDTSTL150
CD DT S/P/R/
G TF 30 Timeout Factor
Example : CDDTSTF30
Get All Decoder Operational
Parameters CD OP G Returns all decoder operational parame-
ter values in an XML element.
Example : CDOPG
Maximum Decodes Per
Read CD OP S/P/R/
G PR 1 The reader will process up to this num-
ber of barcodes per read. If there are
more barcodes in the field of view and
target tolerance, only the first ones will
be decoded.
Valid Range: 1 to 16
Example : CDOPSPR2
Ensure Region of Interest CD OP S/P/R/
G RO 0 0 Disable ROI
Example : CDOPSRO0
1 Enable ROI
Example : CDOPSRO1
Ensure decoded barcoded is always in-
side the region of interest. When dis-
abled, barcode may be decoded as long
as it is partially inside the ROI
Region of Interest Leftmost
pixel CD OP S/P/R/
G RL 0 ROI Left
Region of Interest Topmost
pixel CD OP S/P/R/
G RT 0 ROI Top
Region of Interest width (pix-
els) CD OP S/P/R/
G RW 1280 ROI width
Region of Interest height
(pixels) CD OP S/P/R/
G RH 960 ROI height
Low Contrast 1D CD OP S/P/R/
G LC 0 0 Disable Low Contrast
Example: CDOPSLC0
1 Enable Low Contrast
Example: CDOPSLC1