Leuze DCR 50, Operating Instructions Manual

Page: 36 / 92

Configuration control
Leuze electronic DCR 50 36
Code Description Command Format Op-
tions De-
fault Notes/Examples
QR Code – Mode 1 SY QRC
O S/P/R/
G M1 0 0 Disable
Example: SYQRCOSM10
1 Enable
Example: SYQRCOSM11
Note: This setting value is ignored if QR
Code decoding is disabled.
QR Code – Custom SY QRC
O S/P/R/
G CQ 0 0 Disable
Example: SYQRCOSCQ0
1 Enable
Example: SYQRCOSCQ1
Note: This setting value is ignored if QR
Code decoding is disabled.
Straight 2 of 5 SY S2O5 S/P/R/
G
EN 0 0 Disable
Example: SYS2O5SEN0
1 Enable
Example: SYS2O5SEN1
Telepen – Get All Pa-
rameter SY TELP G Returns all Telepen parameter values in
an XML element.
Example : SYTELPG
Telepen SY TELP S/P/R/
G
EN 0 0 Disable
Example: SYTELPSEN0
1 Enable
Example: SYTELPSEN1
Telepen – Ouput ASCII SY TELP S/P/R/
G
OA 0 0 Disable
Example: SYTELPSOA0
1 Enable
Example: SYTELPSOA1
Note: This setting value is ignored if
Telepen decoding is disabled.
Trioptic – Get All Param-
eter SY TRIO G Returns all Trioptic parameter values in
an XML element.
Example : SYTRIOG
Trioptic SY TRIO S/P/R/
G
EN 0 0 Disable
Example: SYTRIOSEN0
1 Enable
Example: SYTRIOSEN1
Trioptic – Reverse SY TRIO S/P/R/
G
RV 0 0 Disable
Example: SYTRIOSRV0
1 Enable
Example: SYTRIOSRV1
Note: This setting value is ignored if Tri-
optic decoding is disabled.