background image

Configuration and diagnostics software - Sensor Studio

Leuze electronic

DCR 55

19

Decode 

(see chapter 6.5.2 "Decode tab")

Communications 

(see chapter 6.5.3 "Communications tab")

Diagnosis

 (see chapter 6.5.4 "Diagnosis / Terminal")

NOTICE

The online help system displays information on the menu items and configuration parameters
for each function. Select the 

Help

 menu item in the menu [?].

6.5.1

Control tab

Fig. 6.3: 

Control tab

SCAN OPTIONS

Maximum labels to decode

The device processes up to this number of codes per 

read code

event.

• If there are more codes in the field of view and within target toler-

ance and the device is set to decode more than one code, it will
decode all codes in the field of view.

• Set to 1 for fastest performance with single codes.

Targeting

Switch the blue targeting LED on and off.

DECODE OUTPUT OPTIONS

Output Result with AIM ID

Allows for the output of the AIM symbology identifier with the decode
result.

Barcode Prefix / Suffix enabled

Enables/ disables the output of prefix and suffix text with the decode
result.

Barcode Prefix text

Barcode Suffix text

Defines text of up to 255 characters that is added before/after the de-
code result.

Summary of Contents for DCR 55































































































Reviews: