Mounting and installation
Leuze electronic
BPS 301i
41
1
Clamp profile
2
Clamping jaws
3
Screw terminal
Figure 6.10: Mounting the BPS with the BTU 0300M-W mounting device
Mount the BTU 0300M-W on the system side with M6 fastening screws (not included in delivery con
-
tents).
Mount the BPS with the dovetail fastening grooves on the clamping jaws of the BTU 0300M-W with limit
stop at end.
Secure the BPS with the M6 screw terminal.
Maximum tightening torque for the M6 screw terminal: 8 Nm
6.2.4 Mounting with the BT 300 W mounting bracket
Mounting of the BPS with a BT 300 W mounting bracket is intended for wall mounting. For ordering infor
-
mation see chapter 14; for dimensioned drawing see figure 13.10.
Mount the BT 0300 W mounting bracket on the system side with M6 fastening screws (included in deliv
-
ery contents).
Mount the BPS on the mounting bracket with M4 fastening screws (included in delivery contents).
Maximum tightening torque of the M4 fastening screws: 2 Nm
6.2.5 Mounting with BT 56 mounting device
Mounting of the BPS with a BT 56 mounting device is intended for rod mounting. For ordering information
see chapter 14; for dimensioned drawing see figure 13.11.
Mount the BT 56 on the rod with the clamp profile (system-side).
Mount the BPS with its fastening grooves on the clamping jaws of the BT 56 with limit stop at end.
Secure the BPS with the M6 screw terminal.
Maximum tightening torque for the M6 screw terminal: 8 Nm
1
2
3