Device description
Leuze electronic
BPS 301i
25
1
Marker label
Figure 3.14: System arrangement of marker labels
Arrangement when using the marker label without positioning
The marker label must be positioned within the BPS's detection range.
3.4.4 Twin tapes
Twin tapes are jointly manufactured bar code tapes with the same value range.
Twin tapes are used if positioning with two bar code tapes is necessary, e.g., with crane systems or eleva
-
tors.
Because they are manufactured jointly, both tapes have the same length tolerance. As a result, differences
in length and code position are minimal. By having the same code position on both tapes, improved
synchronization can be achieved during positioning compared to bar code tapes that are manufactured
separately.
1
Twin bar code tape 1
2
Twin bar code tape 2
Figure 3.15: Twin tape with double numbering
000040
000044
000048
0000052
000056
1
NOTICE
A twin tape always consists of two bar code tapes!
When ordering a twin tape, two bar code tapes are always included with an order.
Twin tapes are always delivered in pairs on two rolls.
If twin tapes are replaced, both tapes are to be replaced.
Twin tapes can be ordered from Leuze electronic (see chapter 14.6 "Bar code tapes").
1
2
