Commissioning – Leuze electronic webConfig tool
Leuze electronic
BCL 600i/BCL 601i
49
9
Commissioning – Leuze electronic webConfig tool
With the Leuze webConfig tool, an operating-system independent, web-technology based, graphical user
interface is available for configuring bar code readers of the BCL 600i series.
Through the use of HTTP as communication protocol and by using only standard technologies on the client
side (HTML, JavaScript and AJAX), which are supported by all commonly used, modern browsers (e.g.
Mozilla Firefox beginning with Version 4, Internet Explorer beginning with Version 8.0 and Microsoft Edge),
it is possible to operate the Leuze webConfig tool on any internet-ready PC.
9.1
Connecting the service USB interface
The connection to the SERVICE USB interface of the device is established via the PC-side USB interface
using a special USB cable with 2 type A/A plugs.
9.2
Installation
9.2.1 System requirements
Operating system:
Windows 2000
Windows XP (Home Edition, Professional)
Windows Vista
Windows 7
Windows 8
Windows 10
Computer:
PC with USB interface version 1.1 or higher
Graphics card:
Min. 1024 x 768 pixels or higher resolution
Required disk capacity:
Approx. 10 MB
9.2.2 Installing the USB driver
In order for the device to be automatically detected by the connected PC, the USB driver must be installed
once on your PC. To do this, you must have administrator privileges.
Please proceed according to the following steps.
Start your PC with administrator privileges and log on.
Load the CD included in the delivery contents of your device in the CD drive and start the setup.exe
program.
Alternatively, you can also download the setup program from the internet at www.leuze.com.
Follow the instructions provided by the setup program.
Upon successful installation of the USB driver, an icon automatically appears on the desktop.
To check: In the Windows device manager, a device called “Leuze electronic, USB Remote NDIS Network
Device” appears under the “Network adapter” device class following successful USB registration.
It is recommended to update the operating system regularly and to install the current Windows
service packs.
If the installation failed, contact your network administrator: The settings of the firewall used may
need to be adjusted.
