Leuze electronic 50143561, Original Operating Instructions, Page: 43 / 64

Leuze electronic CMS 700i
– Contour Measurement System
Page 43
8.2.1.2 Setting the offset for valid height detection
NOTICE
This setting only affects the height light curtain!
In order for the CMS 700i to output the correct height of a measuring object, the mechanical distance
between the conveyor plane and the first light beam of the height light curtain must be entered. The
determination of the required distances in the measuring scene is described in chapter 7.4.1.
Figure 35: Input field for height offset
If the object height is less than the minimum detectable height of the light curtain,

A system with 2 light curtains and 1 encoder does not output a valid height value,

A system with 3 light curtains does not output a value if no beams of the LENGTH light curtain
are interrupted,

A system with 3 light curtains does not output a valid height value.