Leuze electronic
CMS 700i
– Contour Measurement System
Page 15
Error output
None
None
Deformation
detection not
possible
None
Status
OK
OK
NOK
OK
The overhangs and bulges can occur in longitudinal, width and height direction.
The following figure of an object (grey box) on a conveyor serves for orientation of the direction
information. The red bars represent the light curtains. The grey arrows indicate the conveying
direction.
Figure 6: Views to display the direction information.
4.3.2 Overhang suppression Length
If the width of the overhang ∆A is smaller than the threshold value entered, it is suppressed and not
taken into account in the length measurement.
NOTICE
The overhang suppression and deformation detection is also carried out for the versions with
rotary encoder for longitudinal measurement.
Figure 7: Schematic representation of an object overhang in longitudinal direction