Leuze electronic 50143561, Original Operating Instructions, Page: 40 / 64

Leuze electronic CMS 700i
– Contour Measurement System
Page 40
Another way to measure the height-offset value is

To perform a reference measurement on an object of known height. To do this, the object
must be moved through the system.

The difference between the displayed and known height of the object must then be calculated.

The offset must be entered as a numerical value in millimeters in WebConfig, see chapter
8.2.1.2!
Figure 31: First beam of HEIGHT light curtain in plane with conveyor, Height offset = 0 mm
Figure 32: First beam of HEIGHT light curtain above the conveyor, Height offset = X mm