27
3.10 Climb Out
Condition(s):
1.
Precision RDASS at 10m flight altitude
2.
Sufficient clearance to perform maneuver
Standard(s):
1.
Stop over desired point ± 5 meters
Crew Actions:
Operator Controlling the Aircraft (OCA):
1.
Maintain Visual Line of Sight with Aircraft throughout
entire maneuver.
Visual Observer (VO):
1.
Assist the OCA in obstacle avoidance.
Procedure:
Remote Control. Apply simultaneous forward pressure on the
throttle and the cyclic to climb up and out. As the aircraft
approaches the desired altitude relax pressure on the throttle
to allow the throttle to return to the spring-loaded neutral
position while maintaining forward pressure on the cyclic.
Flight Tablet. Increase the Fly-to altitude to desired altitude. The
aircraft will begin to climb. Apply a forward cyclic input on the
virtual joysticks in the desired direction. The aircraft will stop
climbing once it reaches the fly-to altitude.
Summary of Contents for Precision RDASS
