23
3.6 Tail-In H Pattern
Condition(s):
1.
Precision RDASS at a minimum 15m flight altitude
2.
Sufficient clearance to perform maneuver
Standard(s):
1.
Maintain consistent speed throughout the maneuver.
2.
Maintain desired ground track ± 3 meters
Crew Actions:
Operator Controlling the Aircraft (OCA):
1.
Announce to the Visual Observer direction of flight
relative to the aircraft orientation. e.g. “Aircraft
Forward”, “Aircraft Aft”, “Aircraft Slide Left”, Aircraft
Slide Right”
Visual Observer (VO):
1.
Assist the OCA in obstacle avoidance
Procedure:
For training the tail-in H Pattern shall be accomplished using both
the flight tablet and the remote control. Beginning at position ❶,
the OCA will apply a forward input on the cyclic to achieve 1 - 2 m/s
forward flight. Smoothly return the cyclic to the neutral position in
order to stop at Position ❷. Apply an aft input on the cyclic to
achieve 1 - 2 m/s rearward flight. Smoothly return the cyclic to the
neutral position to stop at position❸. Apply a right input on the
cyclic to achieve 1 - 2 m/s sideward flight to the right. Smoothly stop
at position❹. Apply a forward input on the cyclic to achieve 1 - 2
m/s forward flight. Smoothly stop at position ❺. Apply an aft input
on the cyclic to achieve 1 - 2 m/s rearward flight. Smoothly return
the cyclic to the spring-loaded neutral position to terminate at
position ❻.
Summary of Contents for Precision RDASS
