8
2.6 Vertical Descent and Landing from a 1m
Hover
Condition(s):
1.
Syma X5 with remote control bound
2.
Aircraft in a stable hover located over the intended landing
area
Standard(s):
1.
Smooth, continuous descent from a hover to the ground
2.
Maintain heading ± 10 degrees
3.
Maintain throttle at full-down position until rotors come to
a complete stop
Crew Actions:
Pilot on the Controls:
1.
Announce “Landing to the Ground”
Visual Observer:
1.
Confirm to the Pilot on the Controls that the aircraft is
above the intended landing area
Procedure:
The Pilot on the Controls will apply downward pressure on the
throttle in order to achieve a 1 m/s rate-of-descent. As the
aircraft passes through 0.25 meters, the Pilot on the Controls
will VERY slowly and progressively reduce the throttle to the full
down position so that the throttle arrives at the full-down
position just after the aircraft arrives at the ground. The Pilot on
the Controls will maintain the throttle full-down position until
the rotors completely stop.
Summary of Contents for Precision RDASS
