14
2.11 Tail-in-the-Box
Condition(s):
1.
SYMA X5 at 1.5m flight altitude
2.
Sufficient clearance to perform maneuver
3.
Tail of the aircraft oriented toward a central area
Standard(s):
1.
Maintain heading ± 10 degrees of desired heading.
2.
Maintain desired ground track ± 1m
3.
Maintain consistent speed throughout entire maneuver
Crew Actions:
Pilot on the Controls:
1.
Maintain visual line of sight with aircraft throughout
entire maneuver
Visual Observer:
1.
Assist the Pilot on the Controls in determining the
position of the aircraft over the intended ground track
Procedure:
Begin at position
❶
with the aircraft nose-in. Apply lateral cyclic
pressure in the desired direction. Just prior to intersecting the
perpendicular flight path
❷
, apply pressure on the pedals in the
SAME direction as the cyclic until the aircraft has yawed 90 degrees.
Begin a yaw turn by applying pressure on the pedals in the SAME
direction as the cyclic. Apply slight aft cyclic to stop forward drift.
Continue to repeat SAME direction inputs as required.
❶
❷
❸
❹
Linear Feature of Interest
Linear Feature of Interest
Lin
ear Fea
ture
o
f In
teres
t
Lin
ear Fea
ture
o
f In
teres
t
Summary of Contents for Precision RDASS
