Switching times of the spring-applied brakes
t
t
M
t 2
t 12
t 11
t 1
Mdyn
U
0.1M
dyn
t
1
Engagement time
t
11
Delay time during linking
t
2
Disengagement time (up to M = 0.1 M
dyn
)
t
12
Rise time of the braking torque
M
dyn
Braking torque at constant speed
U
Voltage
Versions
Protection class IP55
Standard
Control
DC supply
AC supply via rectifier in the terminal box
Supply voltages
DC voltage
DC 24 V ±10 %
DC 205 V ±10 %
Mains voltage
AC 230 V ±10 %
AC 400 V ±10 %
AC 460 V ±10 %
Switching cycles
Repetitive
1 x 10
6
Reversing
1 x 10
6
Friction lining
Low-wear
Options
Manual release
UL/CSA-approved
Braking torques
An application brake with several braking torques is available for every motor frame size for an
optimum adjustment of the brake motor to the application. Starting from a standard braking
torque, the braking torques can be adjusted up or down.
When the braking torque is reduced, great wear reserves can be attained. A higher braking
torque is to be provided for lifting applications. In this case, the earth’s gravity acts as an
additional acceleration in a negative direction.
In addition, some applications require a 2-fold safety factor for the braking torque.
Product extensions
Brakes
Spring-applied application brake
89