Lenze IE3 g500-H, Project Planning Manual

Page: 28 / 112

Lubricants
Lubricant CLP 220 CLP 460
Ambient temperature 0 ... +40 °C
Specification Mineral oil with EP additives
Changing interval
Operating hours 16000
Not later than after 3 years
At oil temperature 80 °C
Manufacturer Fuchs Klüber Shell Fuchs Klüber Shell
Manufacturer series Renolin Klüberoil Omala Renolin Klüberoil Omala
Manufacturer type CLP 220 CLP Plus
220
GEM
1-220 N
S2 G 220 S2 GX 220 CLP 460 CLP Plus
460
GEM
1-460 N
S2 G 460 S2 GX 460
Lubricant CLP HC 220 CLP HC 220USDA H1 CLP HC 320
Ambient temperature -30 ... +40 °C -20 ... +40 °C -20 ... +50 °C
Specification Synthetic oil (polyalfaolefins basis)
Changing interval
Operating hours 25000 16000 25000
Not later than after 4 years 3 years 4 years
At oil temperature 80 °C
Manufacturer Fuchs Klüber Shell Fuchs Klüber Fuchs Klüber Shell
Manufacturer series Renolin Unisyn Klübersyn
th
Omala Cassida
Fluid
Klüberoil Renolin Unisyn Klübersyn
th
Omala
Manufacturer type CLP 220 XT 220 GEM
4-220 N
S4 GX HD
220
GL 220 4
UH1-220
N
CLP 320 XT 320 GEM
4-320 N
S4 GX HD
320
Lubricant amounts for stocking
All lubricant amounts are reference values for a change of lubricant. They serve stocking
purposes, for example.
The exact values can be found on the nameplate.
Gearbox M1 (A) M2 (D) M3 (B) M4 (C) M5 (F) M6 (E)
l l l l l l
g500-H5000-2 6 19 19.9 19.9 18.4 12.1
g500-H5000-3 6 19 19.9 19.9 18.4 12.1
g500-H8000-2 9.4 32 31.5 32.5 29 20.5
g500-H8000-3 9.4 32 31.5 32.5 29 20.5
g500-H14000-2 13.6 47.5 49 49.5 45 33
g500-H14000-3 13.6 47.5 49 49.5 45 33
Information on project planning
Final configuration
Lubricants
28