Information on mechanical installation
Important notes
•
Install the product according to the information in the chapter "Standards and operating
conditions".
Standards and operating conditions
•
The technical data and the data regarding the supply conditions can be found on the
nameplate and in this documentation.
•
Ambient media − especially chemically aggressive ones − may damage shaft sealing rings,
lacquers and plastics.
•
Lenze offers special surface and corrosion protection in this case.
Transport
•
Ensure appropriate handling.
•
Make sure that all component parts are securely mounted. Secure or remove loose
component parts.
•
Only use safely fixed transport aids (e.g., eye bolts or support plates).
•
Do not damage any components during transport.
•
Avoid electrostatic discharges on electronic components and contacts.
•
Avoid impacts.
•
Check the carrying capacity of the hoists and load handling devices. The weights can be
found in the shipping documents.
•
Secure the load against tipping and falling down.
•
Standing beneath suspended loads is prohibited.
Installation
•
The mounting surfaces must be plane, torsionally rigid and free from vibrations.
•
The mounting areas must be suited to absorb the forces and torques generated during
operation.
•
Ensure an unhindered ventilation.
•
For versions with a fan, keep a minimum distance of 10 % from the outside diameter of the
fan cover in intake direction.
Information on mechanical installation
Important notes
32
