Application as directed
•
The product must only be actuated under the operating conditions and power limits
specified in this documentation.
•
The product meets the protection requirements of 2014/35/EU: Low-Voltage Directive.
•
The product is not classed as a machine under 2006/42/EC: Machinery Directive.
•
No machine is to be commissioned or put into operation as intended in conjunction with
the product until it has been determined that the machine meets the regulations of EC
Directive 2006/42/EC: Machinery Directive; observe EN 60204−1.
•
Commissioning or putting into operation as intended is only permitted in compliance with
the EMC Directive 2014/30/EU.
•
The product is not a household appliance. Instead, it is a component that is intended
exclusively for further use in the context of commercial or professional use as defined by
EN 61000−3−2.
•
The product can be used according to the technical data if the drive systems have to
comply with categories in accordance with EN 61800−3.
•
Do not use the built-in brakes as fail-safe brakes. Disruptive factors that cannot be
influenced may cause the braking torque to be reduced.
•
The product may be operated with or without an inverter.
•
The harmonized standards of the series IEC/EN60034 are used.
Foreseeable misuse
•
Use in potentially explosive areas
•
Use in agressive environments
•
Use under water
•
Use under radiation
•
Use in generator mode
Information on project planning
Safety instructions
Application as directed
16
