Lenze · Decentralised frequency inverter 8400 motec (EtherNet/IP™ option) · EDS84DMOTEIP EN 3.0 - 02/2019
49
I/O data transfer (implicit messages)
Technology applications (TA) / drive profiles
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8.3
Technology applications (TA) / drive profiles
The Inverter Drives 8400 motec is provided with various drive profiles. They define a standardised/
individual control and status word assignment and the standardisation of setpoints and actual
value scalings.
The following drive profiles are supported by the Inverter Drive 8400 motec:
• Lenze technology applications / user-definable parameter sets
• "AC Drive Profile" application
8.3.1
Lenze technology applications / user-definable parameter sets
The technology applications integrated in the inverter provide the main signal flow for realising a
general or specific drive solution.
For using the Lenze technology application selection in the »Engineer« via standard device code
C00005
, the following assembly object instances have to be used in the host (scanner):
See also
.
The custom assemblies also allow for a user-definable parameter setting, depending on the
application. Hence, the data words can be freely assigned with variables of the MCI port blocks in
the »Engineer«.
The user-definable parameter setting can be used in addition to the previously set technology
application.
Lenze technology application / configuring user-definable parameter sets
Tip!
Here you will find information on configuring with the »RSLogix 5000« programming
software from Rockwell:
I/O configuration with »RSLogix 5000« version 19 or lower
I/O configuration with »RSLogix 5000« version 20 or higher
Instance ID
Assembly object instance
[dec]
[hex]
110
0x6E
Custom Output
(from the adapter to the scanner)
111
0x6F
Custom Input
(from the adapter to the scanner)