Lenovo ThinsStation P320 Hardware Maintenance Manual Download Page 96

Page: 96 / 202

Message/Symptom

FRU/Action

"Insert a Diskette" icon appears with a known-good
diagnostics diskette in the first 3.5-inch diskette drive.

1. System Board

2. Diskette Drive Cable

3. Network Adapter

Intensity or color varies from left to right of characters
and color bars

1. Display

2. Video adapter (if present)

3. System Board

No power or fan not running

1. See “Hard disk drive boot error” on page 84.

Non-system disk or disk error-type message with a
known-good diagnostic diskette.

1. Diskette Drive

2. System Board

3. Diskette Drive Cable

Other display symptoms not listed above (including blank
or illegible display)

1. Display

2. System Board

Power-on indicator or hard disk drive in-use light not on,
but computer works correctly

1. Power switch/LED assembly

2. System Board

Printer problems

1. Printer

2. System Board

Program loads from the hard disk with a known-good
diagnostics diskette in the first 3.5-inch diskette drive

1. Run the Setup Utility program and check the Startup

sequence.

2. Diskette Drive

3. Diskette Drive Cable

4. System Board

5. Power Supply

RPL computer cannot access programs from its own hard
disk.

1. If the network administrator is using LCCM Hybrid

RPL, check the startup sequence:

First device - network

Second device - hard disk

2. Hard disk drive

RPL computer does not RPL from server

1. Check the startup sequence.

2. Check the network adapter LED status.

Serial or parallel connector device failure (system board
connector)

1. External Device Self-Test OK?

2. External Device

3. Cable

4. System Board

Serial or parallel connector device failure (adapter
connector)

1. External Device Self-Test OK?

2. External Device

3. Cable

4. Alternate Adapter

5. System Board

Some or all keys on the keyboard do not work

1. Keyboard

2. Keyboard Cable

3. System Board

P320 Hardware Maintenance Manual

Summary of Contents for ThinsStation P320











































































































































































































Search results

Summary of Contents for ThinsStation P320

Reviews:

Lenovo ThinsStation P320, Hardware Maintenance Manual, Page: 96 / 202

Search results

Summary of Contents for ThinsStation P320

Reviews: