Lenovo ThinsStation P320 Hardware Maintenance Manual Download Page 90

Page: 90 / 202

– Select the recovery medium you created earlier with the Windows tool as the startup device. See

“Selecting a temporary startup device” on page 66. Then, follow the instructions on the screen
to choose the appropriate recovery solution.

• Use the recovery USB key provided by Lenovo to restore the entire storage drive to the factory-default

settings.

– If your computer comes with the recovery USB key, follow the instructions shipped with the USB key.

– If your computer does not come with the recovery USB key, contact the Lenovo Customer Support

Center to order a recovery USB key. See “Calling for service” on page 170.

P320 Hardware Maintenance Manual

Summary of Contents for ThinsStation P320











































































































































































































Search results

Summary of Contents for ThinsStation P320

Reviews:

Lenovo ThinsStation P320, Hardware Maintenance Manual, Page: 90 / 202

Search results

Summary of Contents for ThinsStation P320

Reviews: