Lenovo ThinsStation P320 Hardware Maintenance Manual Download Page 199

Page: 199 / 202

Appendix H. Trademarks

The following terms are trademarks of Lenovo in the United States, other countries, or both:

Lenovo
The Lenovo logo
ThinkStation
The ThinkStation logo
ThinkVantage

Microsoft, Windows, and Windows Media are trademarks of the Microsoft group of companies.

Intel, Intel Xeon, Intel Core, Intel Pentium, and Thunderbolt are trademarks of Intel Corporation in the U.S.
and/or other countries.

Linux is a registered trademark of Linus Torvalds.

DisplayPort and Mini DisplayPort are trademarks of the Video Electronics Standards Association.

Ubuntu is a registered trademark of Canonical Ltd.

Other company, product, or service names may be trademarks or service marks of others.

191

Summary of Contents for ThinsStation P320











































































































































































































Search results

Summary of Contents for ThinsStation P320

Reviews:

Lenovo ThinsStation P320, Hardware Maintenance Manual, Page: 199 / 202

Search results

Summary of Contents for ThinsStation P320

Reviews: