Lenovo ThinkSystem SR635 Maintenance Manual Download Page 144

Page: 144 / 246

Remove the backplane for eight 2.5-inch hot-swap drives

Use this information to remove the backplane for eight 2.5-inch hot-swap drives.

Static Sensitive Device

Ground package before opening”

on page 82

Before removing the backplane:

1. Remove the top cover. See “Remove the top cover” on page 89.
2. Remove all the installed drives and drive fillers from the drive bays. See “Remove a hot-swap drive” on

page 111 and “Install a hot-swap drive” on page 112.

To remove the backplane, complete the following step:

Watch the procedure

. A video of the installation and removal process is available:

• YouTube:

https://www.youtube.com/playlist?list=PLYV5R7hVcs-DTDY1lmpIPpJVOzo7dKq14

• Youku:

http://list.youku.com/albumlist/show/id_52222446.html

Figure 112. Removal of backplane for eight 2.5-inch hot-swap drives

Step 1. Grasp the backplane and carefully lift it out of the chassis.
Step 2. Disconnect the cables from the backplane.

If you are instructed to return the old backplane, follow all packaging instructions and use any packaging
materials that are provided.

Install the backplane for eight 2.5-inch hot-swap drives

Use this information to install the backplane for eight 2.5-inch hot-swap drives.

134

ThinkSystem SR635 Maintenance Manual

Summary of Contents for ThinkSystem SR635























































































































































































































































Search results

Summary of Contents for ThinkSystem SR635

Reviews:

Related manuals for ThinkSystem SR635

Brands by name

Popular brands

Lenovo ThinkSystem SR635, Maintenance Manual

Search results

Summary of Contents for ThinkSystem SR635

Reviews:

Related manuals for ThinkSystem SR635

Brands by name

Popular brands