Lenovo ThinkSystem SR150 Setup Manual Download Page 3

Page: 3 / 90

Contents

Contents . . . . . . . . . . . . . . . . . i

Safety . . . . . . . . . . . . . . . . . . iii

Safety inspection checklist . . . . . . . . . . . iv

Chapter 1. Introduction . . . . . . . . . 1

Server package contents .  .  .  .  .  .  .  .  .  .  .  .  1
Features.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  2
Specifications .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  3

Particulate contamination . . . . . . . . . . 6

Management options. . . . . . . . . . . . . . 7

Chapter 2. Server components . . . . 11

Front view . . . . . . . . . . . . . . . . . 12

Front operator panel . . . . . . . . . . . 14

Rear view . . . . . . . . . . . . . . . . . 14
System-board layout . . . . . . . . . . . . . 16

System-board LEDs .  .  .  .  .  .  .  .  .  .  .  16
System-board connectors .  .  .  .  .  .  .  .  .  16
System-board jumpers and buttons .  .  .  .  .  19

PCIe riser assembly .  .  .  .  .  .  .  .  .  .  .  .  .  20
Backplate .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  20
Internal cable routing.  .  .  .  .  .  .  .  .  .  .  .  .  22

Fan cables .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  22
VGA cable .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  23
Fixed power supply cables.  .  .  .  .  .  .  .  .  24
Backplate cables .  .  .  .  .  .  .  .  .  .  .  .  25

Parts list. . . . . . . . . . . . . . . . . . 27

Chapter 3. Server hardware setup . . 31

Server setup checklist . . . . . . . . . . . . 31
Installation Guidelines . . . . . . . . . . . . 32

System reliability guidelines . . . . . . . . 33
Handling static-sensitive devices . . . . . . 33

Memory module installation rules and order . . . . 34
Install server hardware options . . . . . . . . . 34

Remove the security bezel .  .  .  .  .  .  .  .  .  35
Remove the top cover .  .  .  .  .  .  .  .  .  .  36
Remove the air baffle .  .  .  .  .  .  .  .  .  .  .  37
Install a fan .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  38
Install the simple-swap drive backplate .  .  .  .  39
Install an adapter .  .  .  .  .  .  .  .  .  .  .  .  40

Install the server in a rack .  .  .  .  .  .  .  .  .  .  .  56
Cable the server .  .  .  .  .  .  .  .  .  .  .  .  .  .  56
Power on the server .  .  .  .  .  .  .  .  .  .  .  .  .  56
Validate server setup .  .  .  .  .  .  .  .  .  .  .  .  .  57
Power off the server .  .  .  .  .  .  .  .  .  .  .  .  .  57

Chapter 4. System configuration . . . 59

Set the network connection for the Lenovo XClarity

Controller .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  59
Update the firmware .  .  .  .  .  .  .  .  .  .  .  .  .  60
Configure the firmware .  .  .  .  .  .  .  .  .  .  .  .  63
Memory configuration .  .  .  .  .  .  .  .  .  .  .  .  64
RAID configuration .  .  .  .  .  .  .  .  .  .  .  .  .  65
Deploy the operating system.  .  .  .  .  .  .  .  .  .  65
Back up the server configuration .  .  .  .  .  .  .  .  66
Update the Vital Product Data (VPD) .  .  .  .  .  .  .  66

Update the Universal Unique Identifier

(UUID). . . . . . . . . . . . . . . . . 67
Update the asset tag . . . . . . . . . . . 68

Chapter 5. Resolving installation
issues . . . . . . . . . . . . . . . . . 71

Appendix A. Getting help and
technical assistance . . . . . . . . . . 75

Before you call .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  75
Collecting service data .  .  .  .  .  .  .  .  .  .  .  .  76
Contacting Support .  .  .  .  .  .  .  .  .  .  .  .  .  77

Index . . . . . . . . . . . . . . . . . . 79

Summary of Contents for ThinkSystem SR150



























































































Search results

Summary of Contents for ThinkSystem SR150

Reviews:

Related manuals for ThinkSystem SR150

Brands by name

Popular brands

Lenovo ThinkSystem SR150, Setup Manual

Search results

Summary of Contents for ThinkSystem SR150

Reviews:

Related manuals for ThinkSystem SR150

Brands by name

Popular brands