Lenovo ThinkSystem SR150, Setup Manual

Page: 46 / 90

Step 1. Lift the air baffle up and set it aside.
Attention:
For proper cooling and airflow, reinstall the air baffle before you turn on the server.
Operating the server with the air baffle removed might damage server components.
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install a fan
Use this information to install a fan.
To avoid possible danger, read and follow the following safety information.
S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off the
electrical current supplied to the device. The device also might have more than one power cord. To
remove all electrical current from the device, ensure that all power cords are disconnected from the
power source.
S009
CAUTION:
To avoid personal injury, disconnect the fan cables before removing the fan from the device.
Before you install a fan, complete the following steps:
1. Read “Safety” on page iii and “Installation Guidelines” on page 32 to ensure that you work safely.
To install a fan, complete the following steps:
38
ThinkSystem SR150 Setup Guide