Lenovo ThinkSystem SR150 Setup Manual Download Page 74

Page: 74 / 90

– Lenovo XClarity Integrator deployment pack for SCCM (for Windows operating system only)

https://sysmgt.lenovofiles.com/help/topic/com.lenovo.lxci_deploypack_sccm.doc/dpsccm_c_endtoend_
deploy_scenario.html

•

Single-server

Available tools:

– Lenovo XClarity Provisioning Manager

“OS Installation” section in the LXPM documentation compatible with your server at

https://

sysmgt.lenovofiles.com/help/topic/lxpm_frontend/lxpm_product_page.html

– Lenovo XClarity Essentials OneCLI

http://sysmgt.lenovofiles.com/help/topic/toolsctr_cli_lenovo/onecli_r_uxspi_proxy_tool.html

– Lenovo XClarity Integrator deployment pack for SCCM (for Windows operating system only)

https://sysmgt.lenovofiles.com/help/topic/com.lenovo.lxci_deploypack_sccm.doc/dpsccm_c_endtoend_
deploy_scenario.html

Manual deployment

If you cannot access the above tools, follow the instructions below, download the corresponding

Installation Guide

, and deploy the operating system manually by referring to the guide.

1. Go to

https://datacentersupport.lenovo.com/solutions/server-os

2. Select an operating system from the navigation pane and click

Resources

3. Locate the “OS Install Guides” area and click the installation instructions. Then, follow the instructions to

complete the operation system deployment task.

Back up the server configuration

After setting up the server or making changes to the configuration, it is a good practice to make a complete

backup of the server configuration.

Make sure that you create backups for the following server components:

•

Management processor

You can back up the management processor configuration through the Lenovo XClarity Controller
interface. For details about backing up the management processor configuration, see:

“Backing up the BMC configuration” section in the XCC documentation compatible with your server at

https://sysmgt.lenovofiles.com/help/topic/lxcc_frontend/lxcc_overview.html

Alternatively, you can use the

save

command from Lenovo XClarity Essentials OneCLI to create a backup

of all configuration settings. For more information about the

save

command, see:

http://sysmgt.lenovofiles.com/help/topic/toolsctr_cli_lenovo/onecli_r_save_command.html

•

Operating system

Use your backup methods to back up the operating system and user data for the server.

Update the Vital Product Data (VPD)

After initial setup of the system, you can update some Vital Product Data (VPD), such as asset tag and

Universal Unique Identifier (UUID).

ThinkSystem SR150 Setup Guide

Summary of Contents for ThinkSystem SR150



























































































Search results

Summary of Contents for ThinkSystem SR150

Reviews:

Related manuals for ThinkSystem SR150

Brands by name

Popular brands

Lenovo ThinkSystem SR150, Setup Manual

Search results

Summary of Contents for ThinkSystem SR150

Reviews:

Related manuals for ThinkSystem SR150

Brands by name

Popular brands