Lenovo ThinkSystem HR350A User Manual And Hardware Maintenance Manual Download Page 44

Page: 44 / 171

3.4.1 ACPI Settings

ACPI Settings

Description

Enable ACPI Auto Configuration

Select Enabled to let the BIOS select the best ACPI options for the system.

Select

Disabled

to manual change ACPI following settings.

ACPI Sleep State

Supports only Sleep State S3.

The options are

and Disabled.

Enable CPPC

Allow Firmware to communicate with OS using CPPC

(Collaborative Processor Performance Control).

The options are

Enabled

and Disabled.

Enable DVFS

Enable DVFS (Dynamic Voltage and Frequency Scaling) mode.

This mode can be changed only when CPPC enabled and

the chip supports it.

The options are Enabled and

Disabled

Enable LPI

Allow the system to go to LPI (Lower Power Idle) mode.

The options are

Enabled

and Disabled.

Summary of Contents for ThinkSystem HR350A












































































































































































Search results

Summary of Contents for ThinkSystem HR350A

Reviews:

Related manuals for ThinkSystem HR350A

Brands by name

Popular brands

Lenovo ThinkSystem HR350A, User Manual And Hardware Maintenance Manual

Search results

Summary of Contents for ThinkSystem HR350A

Reviews:

Related manuals for ThinkSystem HR350A

Brands by name

Popular brands