Lenovo ThinkSystem HR350A User Manual And Hardware Maintenance Manual Download Page 20

Page: 20 / 171

2.1.3 Front control panel

Figure 3 Front control panel

1. Power button with power status LED

1. Steady green light: the server is on.
2. Off: the server is off.
3. Blinking green: the server is DC off.

2. System ID button with ID LED

1. Steady blue light: the server is identified.
2. Off: the server is not identified.
3. Press 5 secs, initiate BMC reset.

3. Network status LED

1. Steady green light: the network is connected.
2. Blinking green light: the network is connected and active.
3. Off: the server is disconnected from the network or the server is
off.

4. System health LED

1. Steady yellow light: key component failure.
2. Off: the server is off, or the server is on and is working correctly.

5. VGA connector

6. USB2.0 connector (2)

Summary of Contents for ThinkSystem HR350A












































































































































































Search results

Summary of Contents for ThinkSystem HR350A

Reviews:

Related manuals for ThinkSystem HR350A

Brands by name

Popular brands

Lenovo ThinkSystem HR350A, User Manual And Hardware Maintenance Manual

Search results

Summary of Contents for ThinkSystem HR350A

Reviews:

Related manuals for ThinkSystem HR350A

Brands by name

Popular brands