Lenovo ThinkStation P710, Hardware Maintenance Manual

Page: 101 / 220

Error code POST error message Description/Action
1820
More than one external fingerprint
reader is attached. Power off and
remove all but the reader that you set
up within your main operating system.
This error message is displayed when
more than one external fingerprint
reader is connected to the computer.
Power off and remove all but the
reader that you set up within your
main operating system.
1962 No operating system found. Boot
sequence will automatically repeat. This error occurs only after the POST
is completed.
Press any key to repeat boot
sequence.
8998 Not enough shadow RAM resources
for OPTION ROM, not all devices
initialized. Suggest to remove some
add-on cards, or change to UEFI
mode in BIOS setup. This error message is displayed when
the shadow RAM resources for option
ROM are insufficient.
If the legacy option ROM is
insufficient, remove some add-in
cards.
For the system that supports UEFI,
set UEFI as the first priority or disable
CSM in BIOS setup.
8999 Not enough PCIe/PCI MMIO
resources. Currently only one video
card is enabled. Please remove some
PCIe cards, or enter BIOS Setup and
enable “Above 4GB Decode” This error message is displayed
when the PCIe/PCI MMIO (memory
mapped input/output) resources are
insufficient.
For the 32-bit operating system,
remove some add-in cards.
For the 64-bit operating system,
enable
Above 4 GB Decode in BIOS
setup.
Miscellaneous error conditions
Message/Symptom FRU/Action
Changing display colors Display/Monitor
Computer will not power-off. See “Hard disk drive boot
error” on page 92.
1. Power Switch
2. System Board
3. Riser card, if installed.
Computer will not RPL from server
1. Ensure that network is in startup sequence as first
device or first device after diskette.
2. Ensure that network adapter is enabled for RPL.
3. Network adapter (Advise network administrator of
new MAC address)
Chapter 8
.
Service checkout and symptom-to-FRU index
95