Lenovo ThinkStation P710, Hardware Maintenance Manual

Page: 149 / 220

4. If you are replacing a storage drive with a converter, flex the sides of the bracket to remove the converter
from the bracket.
Figure 88. Removing the converter from the type
2
bracket
Remove the storage drive from the converter. See Figure 80 “Removing the metal bracket from the
plastic frame of the converter” on page 139.
5. Install the new storage drive into the converter. See Figure 82 “Installing the storage drive into the metal
bracket of the converter” on page 140.
6. Flex the sides of the bracket and align pins 1 on the bracket with the corresponding holes in the
converter.
Note: Ensure that the circuit board face upward and the connectors
2
face toward the rear of the
bracket.
Figure 89. Installing the converter into the type
2
bracket
Chapter 9
.
Installing or replacing hardware
143