Diagnostic Error Code
FRU/Action
020-198-XXX
PCI test aborted
1.
If a component is called out, make sure
it is connected and/or enabled. See
Chapter 6, “Using the Setup Utility,” on
page 49
2.
Flash the system and re-test. See “Flash
update procedures” on page 235
3.
Go to “Undetermined problems” on page
86
020-199-XXX
PCI test failed, cause unknown
1.
Go to “Undetermined problems” on page
86
2.
Flash the system and re-test. See “Flash
update procedures” on page 235
3.
Replace component under function test
020-262-XXX
PCI system error
1.
PCI card
2.
Riser card, if installed
3.
System board
025-000-XXX
IDE interface Test Passed
No action
025-00X-XXX
025-01X-XXX
IDE interface failure
1.
IDE signal cable
2.
Check power supply voltages
3.
Reseat IDE signal cable
4.
IDE device
5.
System board
025-027-XXX
IDE interface Configuration/Setup error
1.
IDE signal cable
2.
Flash the system. See “Flash update
procedures” on page 235
3.
Reseat IDE signal cable
4.
IDE device
5.
System board
025-02X-XXX
025-03X-XXX
025-04X-XXX
IDE Interface failure
1.
IDE signal cable
2.
Check power supply
3.
Reseat IDE signal cable
4.
IDE device
5.
System board
025-195-XXX
IDE interface Test aborted by user
Information only
Re-start the test, if necessary
025-196-XXX
IDE interface test halt, error threshold
exceeded
1.
Press F3 to review the log file
2.
Re-start the test to reset the log file
025-197-XXX
IDE interface test warning
1.
Make sure the component that is called
out is connected and/or enabled. See
Chapter 6, “Using the Setup Utility,” on
page 49
2.
Re-run test
3.
Replace the component that is called out
in warning statement
4.
Replace the component under test
72
Hardware Maintenance Manual
Summary of Contents for THINKSTATION D10
