Diagnostic Error Code
FRU/Action
030-198-XXX
SCSI interface test aborted
1.
If a component is called out, make sure
it is connected and/or enabled. See
Chapter 6, “Using the Setup Utility,” on
page 49
2.
Flash the system and re-test. See “Flash
update procedures” on page 235
3.
Go to “Undetermined problems” on page
86
030-199-XXX
SCSI interface test failed, cause unknown
1.
Go to “Undetermined problems” on page
86
2.
Flash the system and re-test. See “Flash
update procedures” on page 235
3.
Replace component under function test
035-000-XXX
RAID interface Test Passed
No action
035-0XX-XXX
RAID interface Failure
1.
RAID signal cable
2.
RAID device
3.
RAID adapter card, if installed
4.
System board
035-195-XXX
RAID interface Test aborted by user
Information only
Re-start the test, if necessary
035-196-XXX
RAID interface test halt, error threshold
exceeded
1.
Press F3 to review the log file
2.
Re-start the test to reset the log file
035-197-XXX
RAID interface test warning
1.
Make sure the component that is called
out is connected and/or enabled. See
Chapter 6, “Using the Setup Utility,” on
page 49
2.
Re-run test
3.
Replace the component that is called out
in warning statement
4.
Replace the component under test
035-198-XXX
RAID interface test aborted
1.
If a component is called out, make sure
it is connected and/or enabled. See
Chapter 6, “Using the Setup Utility,” on
page 49
2.
Flash the system and re-test. See “Flash
update procedures” on page 235
3.
Go to “Undetermined problems” on page
86
035-199-XXX
RAID interface test failed, cause unknown
1.
See “Undetermined problems” on page
86
2.
Flash the system and re-test. See “Flash
update procedures” on page 235
3.
Replace component under function test
071-000-XXX
Audio port Interface Test Passed
No action
74
Hardware Maintenance Manual
Summary of Contents for THINKSTATION D10
