Lenovo ThinkStation 4223 User Manual Download Page 90

Page: 90 / 136

Deleting RAID volumes using the LSI MegaRAID BIOS configuration
utility

This section provides instructions on how to delete RAID volumes using the LSI MegaRAID BIOS
configuration utility.

To delete RAID volumes using the LSI MegaRAID BIOS configuration utility, do the following:

1. Enter the LSI MegaRAID BIOS configuration utility. See “Entering the LSI MegaRAID BIOS configuration

utility” on page 77.

2. Click the virtual hard disk drives you want to delete, and then the Virtual Drive window is displayed.

3. Click

Delete

, and then click

4. Click

Yes

to save your changes.

Setting the hot spare hard disk drive

This section provides instructions on how to set the hot spare hard disk drive.

To set the hot space hard disk drive, do the following:

1. Enter the LSI MegaRAID BIOS configuration utility. See “Entering the LSI MegaRAID BIOS configuration

utility” on page 77.

2. Click the hard disk drive you want to set as the hot spare hard disk drive. The Drive window is displayed.

3. Select

Make Global HSP

Make Dedicated HSP

, and then click

4. The main screen of the LSI MegaRAID BIOS configuration utility is displayed, and the hard disk drive

you selected is listed as a hot spare hard disk drive in the right pane.

ThinkStation User Guide

Summary of Contents for ThinkStation 4223









































































































































Search results

Summary of Contents for ThinkStation 4223

Reviews:

Related manuals for ThinkStation 4223

Brands by name

Popular brands

Lenovo ThinkStation 4223, User Manual

Search results

Summary of Contents for ThinkStation 4223

Reviews:

Related manuals for ThinkStation 4223

Brands by name

Popular brands