Lenovo ThinkStation 4223 User Manual Download

Page: 102 / 136

If these actions do not correct the problem, run the diagnostic programs (see “Lenovo Solution Center” on
page 101 for instructions). If you need technical assistance, see Chapter 12 “Getting information, help, and
service” on page 103.

DVD movie will not play

Symptom: DVD movie will not play.

Actions:

• Make sure that the disc surface is clean and not scratched.

• Check the disc or package for regional coding. You might need to purchase a disc with coding for

the region where you are using your computer.

No audio or intermittent audio while playing DVD movie

Symptom: No audio or intermittent audio while playing DVD movie.

Actions:

• Check the volume control settings on your computer and on your speakers.

• Make sure that the disc surface is clean and not scratched.

• Check all cable connections to and from the speakers.

• Use the DVD menu for the video to select a different audio track.

Playback is very slow or choppy

Symptom: Playback is very slow or choppy.

Actions:

• Disable any background programs, such as AntiVirus or Desktop Themes.

• Ensure that video resolution is set to less than 1152 x 864.

Invalid disc or no disc found message

Symptom: Invalid disc or no disc found message

Actions:

• Ensure that a DVD disc is in the drive with the shiny side of the disc facing down.

• Ensure that video resolution is set to less than 1152 x 864.

• On computers that have a CD-ROM or CD-RW drive in addition to a DVD-ROM drive, make sure that the

DVD disc is in the drive labeled “DVD”.

ThinkStation User Guide

Summary of Contents for ThinkStation 4223









































































































































Search results

Summary of Contents for ThinkStation 4223

Reviews:

Related manuals for ThinkStation 4223

Brands by name

Popular brands

Lenovo ThinkStation 4223, User Manual

Search results

Summary of Contents for ThinkStation 4223

Reviews:

Related manuals for ThinkStation 4223

Brands by name

Popular brands