7. To install a new hard disk drive into the bracket, flex the bracket and align pin
1
, pin
2
, pin
3
, and
pin
4
on the bracket with the corresponding holes in the hard disk drive. Do not touch the circuit
board
5
on the bottom of the hard disk drive.
Figure 33. Installing the hard disk drive into the bracket
Note:
If you are replacing or installing a 2.5-inch hard disk drive, you need to install it into a 2.5 to
3.5-inch converter bracket. Then install the 2.5-inch hard disk drive with the converter bracket into
the 3.5-inch hard disk drive bracket.
Figure 34. Installing 2.5-inch to 3.5-inch converter bracket before installing the outer bracket
8. Slide the new hard disk drive into the drive cage until it snaps into position.
50
ThinkStation User Guide
Summary of Contents for ThinkStation 4223
