manualshive.com logo in svg

Lenovo ThinkServer RD540 70AR, User Manual And Hardware Maintenance Manual

The Lenovo ThinkServer RD540 70AR offers optimal performance and reliability. Enhance your understanding and take care of your server efficiently with the comprehensive User Manual and Hardware Maintenance Manual available for free download at manualshive.com. Access essential information and maximize the potential of your server effortlessly.

Share
Download
background image

Note:

The most up-to-date device drivers for various server models are always available for download on

the Lenovo Support Web site at:
http://www.lenovo.com/drivers

•

About

This menu provides the version information and legal notices.

Using the ThinkServer EasyStartup program on a Windows operating
system

You can run the

ThinkServer EasyStartup

DVD on a Windows operating system with the Internet Explorer

®

6.0

Web browser or a later version installed. Enter the operating system and insert the

ThinkServer EasyStartup

DVD into an internal or external optical drive. The DVD starts automatically in most environments. If the DVD
fails to start, open the launch.exe file located in the root directory of the DVD.

Notes:

• You should read and accept the Lenovo License Agreement when prompted.

• You might need to add the Uniform Resource Locator (URL) for the ThinkServer EasyStartup program

Web page to the trusted Web site list so that the page can open correctly.

You can do the following when using the ThinkServer EasyStartup program on a Windows operating system.
For detailed information, refer to the help system.

• View a general introduction to your ThinkServer server model and the specific server configuration

information.

• View general guidance on how to use the

ThinkServer EasyStartup

DVD.

• Download the required device drivers to a removable storage device so that you can easily get the

drivers for server configuration when you need them, especially when you finish installing an operating
system without using the

ThinkServer EasyStartup

DVD and need appropriate device drivers to configure

your server.

• Install the required device drivers directly on the server on which you are running the

ThinkServer

EasyStartup

DVD.

• View information about all server models supported by the ThinkServer EasyStartup program and

information about the device drivers for each server model, including the driver versions and driver
locations in the root directory of the

ThinkServer EasyStartup

DVD.

Note:

The most up-to-date device drivers for various server models are always available for download on

the Lenovo Support Web site at:
http://www.lenovo.com/drivers

Configuring RAID

This topic provides information about RAID and the utility programs that are available for you to configure
RAID.

This topic contains the following items:

•

“About RAID” on page 63

•

“Configuring RAID using the ThinkServer EasyStartup program” on page 64

•

“Configuring the advanced SATA or SAS hardware RAID” on page 64

62

ThinkServer RD540 User Guide and Hardware Maintenance Manual

Summary of Contents for ThinkServer RD540 70AR







































































































































































































Reviews:

No comments

Related manuals for ThinkServer RD540 70AR

Zonet ZUH2000 - User Manual preview
ZUH2000 -
Brand: Zonet Pages: 33
IBM 88743BU - System x3950 E User Manual preview
88743BU - System x3950 E
Brand: IBM Pages: 426
Protogate Freeway 3112 Hardware Installation Manual preview
Freeway 3112
Brand: Protogate Pages: 30
HP 376227-B21 - ProLiant InfiniBand 4x Fabric Copper Switch User Manual preview
376227-B21 - ProLiant InfiniBand 4x Fabric Copper Switch
Brand: HP Pages: 169
Stute Engineering DCX.CLIENT Manual preview
DCX.CLIENT
Brand: Stute Engineering Pages: 29
Viavi G4-Apex-ENT-80T Manual preview
G4-Apex-ENT-80T
Brand: Viavi Pages: 11
USR IOT Cortex-M7 Series At Command Manual preview
Cortex-M7 Series
Brand: USR IOT Pages: 50
TRENDnet TEW-PS3 Specifications preview
TEW-PS3
Brand: TRENDnet Pages: 2
TRENDnet TW100-P1W1 Specifications preview
TW100-P1W1
Brand: TRENDnet Pages: 2
TRENDnet TEW-PS3 Hardware User'S Manual preview
TEW-PS3
Brand: TRENDnet Pages: 25
Black Box Terminal Server User Manual preview
Terminal Server
Brand: Black Box Pages: 131
Red Hat DIRECTORY SERVER 8.0 Administration Manual preview
DIRECTORY SERVER 8.0
Brand: Red Hat Pages: 552
3onedata NP3 T Series Quick Installation Manual preview
NP3 T Series
Brand: 3onedata Pages: 3
Intel SE7221BA1 Technical Manual preview
SE7221BA1
Brand: Intel Pages: 77
Planet NAS-7101 User Manual preview
NAS-7101
Brand: Planet Pages: 49
QUANTA QuantaGrid S31A-1U User Manual preview
QuantaGrid S31A-1U
Brand: QUANTA Pages: 159
QUANTA STRATOS S200 Series S200-X12TS Technical Manual preview
STRATOS S200 Series S200-X12TS
Brand: QUANTA Pages: 245
Inspur NF5488A5 User Manual preview
NF5488A5
Brand: Inspur Pages: 51

Brands by name

Popular brands

Load more brands