Lenovo ThinkServer RD540 70AR, User Manual And Hardware Maintenance Manual

Page: 165 / 198

15. Gently lift each edge of the system board a little bit upward so that the system board is completely
released from the mounting studs on the chassis. Slowly move the system board to the front of the
chassis, and then lift it up to completely remove it out of the chassis.
Note: Carefully handle the system board by its edges.
ID
Mem
CPU
PSU
1
1
1
1
Figure 121. Removing the system board
16. Place the old system board on a clean, flat, and static-protective surface. Touch the static-protective
package that contains the new system board to any unpainted surface on the outside of the server.
Then, remove the new system board from the package.
17. Note the orientation of the new system board and carefully place it into the chassis so that the rear
connectors are inserted into the corresponding holes in the rear panel.
ID
Mem
CPU
PSU
1
1
1
1
Figure 122. Installing the new system board
Chapter 6
.
Installing, removing, or replacing hardware
151