Lenovo ThinkServer RD540 70AR User Manual And Hardware Maintenance Manual Download Page 106

Page: 106 / 198

• If you remove the TR 500 Key from the ThinkServer RAID 500 Adapter, the hardware RAID 5 and RAID 50

levels will be disabled.

• Use any documentation that comes with the TR 500 Key and follow those instructions in addition to

the instructions in this topic.

To remove the TR 500 Key, do the following:

1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all

power cords from electrical outlets and disconnect all cables that are connected to the server.

2. If the server is installed in a rack cabinet, remove the server from the rack cabinet and place it on a flat,

clean, and static-protective surface. See the

Rack Installation Instructions

that comes with the server.

3. Remove the server cover. See “Removing the server cover” on page 69.

4. Remove the cooling shroud. See “Removing and reinstalling the cooling shroud” on page 73.

5. Locate the ThinkServer RAID 500 Adapter, which is installed in the PCI Express card slot on the riser

card assembly 2. Then, disconnect all cables from the ThinkServer RAID 500 Adapter.

6. Remove the riser card assembly 2. The procedure is similar to that of the riser card assembly 1. See

“Replacing the riser card assembly 1” on page 144.

7. Locate the TR 500 Key on the ThinkServer RAID 500 Adapter and then remove it from the ThinkServer

RAID 500 Adapter. You might need to remove the ThinkServer RAID 500 Adapter first, remove the TR
500 Key from the ThinkServer RAID 500 Adapter, and then reinstall the ThinkServer RAID 500 Adapter.
See “Replacing the RAID card” on page 85.

Note:

Carefully handle the TR 500 Key by its edges.

Figure 56. Removing the TR 500 Key

8. Reconnect cables to the ThinkServer RAID 500 Adapter. See “Mini-SAS to mini-SAS signal cable

connections” on page 37.

9. Reinstall the riser card assembly 2. The procedure is similar to that of the riser card assembly 1. See

“Replacing the riser card assembly 1” on page 144.

10. If you are instructed to return the old TR 500 Key, follow all packaging instructions and use any

packaging materials that are supplied to you for shipping.

What to do next:

• To work with another piece of hardware, go to the appropriate section.

ThinkServer RD540 User Guide and Hardware Maintenance Manual

Summary of Contents for ThinkServer RD540 70AR







































































































































































































Search results

Summary of Contents for ThinkServer RD540 70AR

Reviews:

Related manuals for ThinkServer RD540 70AR

Brands by name

Popular brands

Lenovo ThinkServer RD540 70AR, User Manual And Hardware Maintenance Manual

Search results

Summary of Contents for ThinkServer RD540 70AR

Reviews:

Related manuals for ThinkServer RD540 70AR

Brands by name

Popular brands