Lenovo ThinkServer RD440 User Manual And Hardware Maintenance Manual Download Page 106

Page: 106 / 248

5. Disconnect the following signal cables from the signal cable connectors on the backplane for server

models with twelve 3.5-inch hard-disk-drive bays.

• Signal cable for the front controls and LEDs on the right rack handle

• Signal cable for the front USB connectors on the left rack handle

Figure 47. Disconnecting the rack handle signal cables from the backplane

6. On each side of the server, remove the screw that secures the rack handle and then remove the rack

handle from the chassis.

Note:

Carefully pull the signal cable of each rack handle out of the hole in the chassis when you are

removing the rack handles.

Figure 48. Removing the rack handles for server models with twelve 3.5-inch hard-disk-drive bays

7. To reinstall the rack handles for server models with twelve 3.5-inch hard-disk-drive bays, do the

following:

ThinkServer RD440 User Guide and Hardware Maintenance Manual

Summary of Contents for ThinkServer RD440

























































































































































































































































Search results

Summary of Contents for ThinkServer RD440

Reviews:

Related manuals for ThinkServer RD440

Brands by name

Popular brands

Lenovo ThinkServer RD440, User Manual And Hardware Maintenance Manual

Search results

Summary of Contents for ThinkServer RD440

Reviews:

Related manuals for ThinkServer RD440

Brands by name

Popular brands