Lenovo ThinkServer RD440 User Manual And Hardware Maintenance Manual Download Page 54

Page: 54 / 248

ThinkServer RAID 700 Adapter (also known as ThinkServer 9260-8i SAS RAID Adapter)

The following illustration shows the connectors on the ThinkServer RAID 700 Adapter.

Figure 26. ThinkServer RAID 700 Adapter

Ports 7-4

ThinkServer RAID 700 Battery connector

Ports 3-0

Ports 7-4

Used to connect a mini-SAS signal cable. See “Connecting the cables” on page 48.

Ports 3-0

Used to connect a mini-SAS signal cable. See “Connecting the cables” on page 48.

ThinkServer RAID 700 Battery connector

Used to connect a ThinkServer RAID 700 Battery. See “Installing or removing the ThinkServer RAID 700
Battery” on page 113.

ThinkServer RD440 User Guide and Hardware Maintenance Manual

Summary of Contents for ThinkServer RD440

























































































































































































































































Search results

Summary of Contents for ThinkServer RD440

Reviews:

Related manuals for ThinkServer RD440

Brands by name

Popular brands

Lenovo ThinkServer RD440, User Manual And Hardware Maintenance Manual

Search results

Summary of Contents for ThinkServer RD440

Reviews:

Related manuals for ThinkServer RD440

Brands by name

Popular brands