Lenovo ThinkPad 360 Hardware Maintenance Manual Download

Page: 453 / 508

The microphone cable can pick up electrical noise if the
cable path is incorrect.

Do the following to place the cable in its correct position.

1. Position the cable as shown.

2. Install the shield assembly.

3. Move the end of cable to the right.

The following figure shows the final path of the cable.
Make sure the cable is not positioned in any shaded area.

ThinkPad 755CE, 755CSE, 755CV, 755CX (9545)

443

Summary of Contents for ThinkPad 360





























































































































































































































































































































































































































































































































Search results

Summary of Contents for ThinkPad 360

Reviews:

Related manuals for ThinkPad 360

Brands by name

Popular brands

Lenovo ThinkPad 360, Hardware Maintenance Manual

Search results

Summary of Contents for ThinkPad 360

Reviews:

Related manuals for ThinkPad 360

Brands by name

Popular brands