Lenovo ThinkPad 360 Hardware Maintenance Manual Download

Page: 349 / 508

Keyboard/TrackPoint III Related
Symptoms

Symptom/Error

FRU/Action

Keyboard (one or more
keys) does not work.

1. Reseat the three

keyboard cables.

  2. Keyboard
  3. Video Card
  4. System Board

TrackPoint III does not
work.

1. Go to “TrackPoint III

Checkout” on
page 320.

  2. Keyboard
  3. Video Card
  4. System Board

Pointer moves automatically
or does not work correctly.

1. See “TrackPoint III

Checkout” on
page 320.

Indicator Related Symptoms

Symptom/Error

FRU/Action

Indicator incorrectly remains
off or on, but system runs
correctly.

1. Reseat the status

indicator cable.

  2. Status Indicator
  3. Interposer Card
  4. System Board

Battery power status
indicator blinks from green,
yellow, to orange.

1. Check that a correct

battery is installed.

2. Set the battery storage

switch to ON.

  3. Battery Pack
  4. DC/DC Card
  5. System Board

Power Related Symptoms

Symptom/Error

FRU/Action

Power shut down during
operation.

1. Go to “Power

Systems Checkout”
on page 322.

2. Battery Pack

3. Remove the battery

pack and let it cool for
two hours.

4. DC/DC Card
5. Power sources

The system will not
power-off.
(See “Reset Pushbutton” on
page 346.)

1. Press the Reset

pushbutton.

2. System Board

ThinkPad 755CD, 755CDV (9545)

339

Summary of Contents for ThinkPad 360





























































































































































































































































































































































































































































































































Search results

Summary of Contents for ThinkPad 360

Reviews:

Related manuals for ThinkPad 360

Brands by name

Popular brands

Lenovo ThinkPad 360, Hardware Maintenance Manual

Search results

Summary of Contents for ThinkPad 360

Reviews:

Related manuals for ThinkPad 360

Brands by name

Popular brands